Tape used to seal bottles of nicotine in freezer

submitted over 4 years ago by MistyBlue1982

I am going to put my liters of nicotine into smaller bottles for freezing. I just want to know what kind of tape or adhesive everyone uses to seal their Boston rounds. I did get the cone shaped poly caps but I see lots of people put something around the top to block air. Can anyone help? Offer any advice? Also when I clean my bottles before first use would a cycle through the dishwasher with no soap do it the trick?

Comments

8 points

by oOflyeyesOoover 4 years ago

Argon, no need for tape.

2 points

by XtaC23over 4 years ago

That's what I'm gonna use. I managed to find some pure argon online for wine preserving lol

1 points

by oOflyeyesOoover 4 years ago

Yup, that's the easiest way. I have had the same tall can for years. Just a quick squirt.

8 points

by Malawi_noover 4 years ago

No tape, no argon, no problem.

7 points

by samuryan89over 4 years ago

i wrapped all of mine with some electrical tape, stretched tight. not really air or water tight, but makes me feel better lol

2 points

by XtaC23over 4 years ago

It makes a good seal, I've used it before to tape off the ends of pipes to seal in rubbing alcohol for cleaning and it always held up well. Also working in any kind of construction it's a standard to always have electrical tape on you as it's good for everything, even as a bandaid in a pinch lol

1 points

by Binsky89over 4 years ago

I'm not sure how well it'll hold up in the freezer though.

1 points

by Stank_Leeover 4 years ago

I also used electrical tape, can't hurt!

1 points

by thelateoctoberover 4 years agoTobacconist

The only thing to be careful about with electrical tape is that after stretching, it contracts back, and I've had it crack lids on me. Just something to be aware of. 99% of the time I've had no problems, but I definitely wrap a little less tight now.

6 points

by Msgibbs541over 4 years ago

We used electrical tape. It forms very well to the shape and seems like it would prevent any leakages. Just stretch it fairly tight as you wrap it. Hope this helps :)

5 points

by circleuranusover 4 years ago

I wrapped the caps of mine in heat shrink tape. But only because I have the materials already. Don't know that it's worth going out of your way to do it.

4 points

by EdibleMalfunctionover 4 years agoI found my thrill on Blueberry Hill

Glass = boil em to disenfect.

You don't really need tape. But you should be using argon to get rid of the oxygen in the bottle.

1 points

by XtaC23over 4 years ago

Do you spray in the argon before pouring the nicotine in? Or just top it off?

3 points

by thatromadoodover 4 years ago

Fill nic n then spray argon for 2-3 sec. it will feel like nothing is coming out but it is.

2 points

by EdibleMalfunctionover 4 years agoI found my thrill on Blueberry Hill

No, top it off

2 points

by Smells_like_Childrenover 4 years agoMissing One Flavor

Electric tape

2 points

by Gatesy840over 4 years ago

Silicone tape is great, not adhesive but rather stretches then sticks so you can achieve an air tight seal

1 points

by MistyBlue1982over 4 years ago

Where can you get it!? Do you have a pic or a link?

2 points

by Gatesy840over 4 years ago

I got it from my local hardware store, can find it in auto parts stores too. Here is a link of where I got mine from

https://www.bunnings.com.au/tommy-tape-25mm-x-1m-self-fusing-silicone-tape-3-pack_p1560475

2 points

by MistyBlue1982over 4 years ago

This is exactly what I want! Thanks so much!!

1 points

by [deleted]over 4 years ago

[removed]

1 points

by TDVapesover 4 years ago

Heat Shrink

1 points

by ProfessionalHandJobover 4 years ago

i boiled my bottles and will be using electrical tape

1 points

by Roman065over 4 years ago

Good night, I'm new to this, what is argon and where do I buy it and how do I use it? I have 5 bottles of nic in the freezer and I'll open them soon as I protect the nic