16
First timer having some trouble understanding nicotine strength.
submitted about 5 years ago by Brandalf_the_grey

If a bottle of Nicotine is marked at 10%, for example, is that the same 10% as if I were to buy 10% nic juice?

Thanks for looking at this for me, and I hope you're having an amazing day!

Comments
Sort
7 points
 
by NessLeonhartabout 5 years ago

Nicotine base is marked as XXXmg/ml. That’s how many milligrams of nic are in one milliliter of the solution. I buy 100mg/ml nicotine. Then I use a web site mixejuice.com and I input how much juice I want to make, 60, 120ml whatever, and what blend I want; 70/30 vg/pg is my usual. Add what percentage of each flavor concentrate I want to use, and what strength my nicotine base is. Then it gives me precise weights - for 10ml of juice at 3mg nicotine, it will tell me to use .31grams of the nicotine solution. But that’s because I have 100mg/ml nic. If you’re using a weaker/stronger solution the gram weight to add will be different.

And yea you should absolutely be mixing by weight, it’s not even a discussion. The lb-501 scale is perfect for like $30.

Good luck

2 points
 
by Brandalf_the_greyabout 5 years ago

Thank you very much! I just wanted to make sure I didn't mess up, funds are a bit tight but I wanted to make sure that, if nothing else, I have nic stored away before the PMTA hits. It's my understanding that everything else I need for mixing vape juice won't be too hard to get my hands on after that point. If I'm wrong, definitely let me know.

2 points
 
by mysticalbuffaloabout 5 years ago

For juice, no. Don't neglect to stock hardware though. It has a risk of disappearing.

3 points
 
by Brandalf_the_greyabout 5 years ago

For sure. DIY juice is the last step for me, I have 4 mods that I'm just storing and 8 RDAs. Not as much as I would ultimately like to have, but enough to get me through for a few years until (hopefully) stuff starts being approved.

3 points
 
by TomatoSlayerabout 5 years ago

Yep, 10% is 10%, regardless of volume or the other contents. Of course, you're going to dilute it down to around 0.3% (3mg/mL) in your juice (don't vape 10%, that's 100mg/mL!)

2 points
 
by Brandalf_the_greyabout 5 years ago

You are awesome, thanks so much! I just wanted to make sure I understand what I'm actually getting before I sink 100 bucks into nicotine.

3 points
 
by BulletAllergyabout 5 years ago

How much are you getting for a hundred bucks? Make sure you have somewhere to store it too so it doesn't go bad on you!

3 points
 
by Brandalf_the_greyabout 5 years ago

I went ahead and bought 1250ml of CNT 10% from Liquid Barn, VG base, and made space in the freezer for it.

Just stocking up on nic before the PMTA kicks in. Got my RDAs, got a few mods, including a Geekvape Aegis and a Smoant Battlestar, both of which are supposed to be indestructible, and now I'm just working on the last phase of my prep, the DIY juice.

2 points
 
by QueenBuzyBeeabout 5 years ago

Hi. 10% nicotine = 100mg/ml nicotine.

1 points
 
by LagartoCrewabout 5 years ago

I heard that the 5% Juul pods have actually about 62mg because it's 0.8ml

2 points
 
by electrobrainsabout 5 years ago

That doesn't make sense. If it were labeled "50mg" then that would be ambiguous and maybe mean 62mg or 50mg/mL.

1 points
 
by EdibleMalfunctionabout 5 years agoI found my thrill on Blueberry Hill

It's 5% by weight. So it's 59mg/ml

1 points
 
by electrobrainsabout 5 years ago

Ahh, I've never seen that one before -- I always thought that % was only used to refer to by volume for nicotine content.

1 points
 
by PizzleR0tabout 5 years ago

This is correct. The reasoning lies behind the difference between percentage, more specifically percent w/w, which is comparing the weights of the solute to solvent; and concentration, which is w/v i.e. comparing weight of the solute to volume of the solvent. It doesn't seem intuitive at first because we're generally used to water being the solvent, and since it has a density of 1 gram per mL, percentages and concentrations, or w/w and w/v measurements, are directly interchangeable. When using a solvent that has a density other than 1, like a VG/PG solution, additional maths are required to convert between gravimetric- and volumetric-base expressions of concentration.

Site copyright © 2025 DIY Compendium. Data courtesy of Reddit.