This thread is for you to share what you are vaping lately, be it your own or another mixers recipe. Maybe you happened to stumble upon your new ADV in the December Recipes Thread? Or did someone recommend your first mix to you in the Suggest a recipe for my flavors Thread
Share what you liked or didn't like too much, but most importantly, please make sure to properly link to the recipe and to the mixer if they're on reddit.
If you need some inspiration, some websites keep track of your mixes and batches: e-Liquid Recipes and All The Flavors.
Also make sure to checkout last week's thread for inspiration or to follow up on a mix that turned out even better after a week of steeping! We keep an archive of all the past threads in our wiki as well
Happy Vaping!
Mixed together in my RDA. One of these days I'll figure out the percentages for a combo recipe, but for now, it tastes like peppermint ice cream and everyone should try it!
I was looking forward to making The Trinity Vanilla Ice Cream but BCF was out of Hangsen French Vanilla Ice Cream when I ordered last week. Now I think that flavor has been removed from their site, not sure if they do that when they are out of stock or if they are not going to carry it anymore.
Having never tried Hangsen FVIC, I wonder if there is something else that could replace it.
> Having never tried Hangsen FVIC, I wonder if there is something else that could replace it.
Nope.
I guess I'm quite a fan of ENYAWREKLAW. The three recipes that I have mixed right now that are in my atomizers are his Lemon Crumble Cake, his Root Beer Float, and his Chocolate Milks. I see that I need to get out more.
That's Wayne from diyordie. Check out his YouTube channel if you haven't already
​
Co. | Flavor | %
---|---|----
INW | Biscuit | 1.5
FW | Blueberry | 2.5
FE | Lemon | 2
CAP | Sugar Cookie | 5
CAP | Vanilla Custard | 1
​
3 Days. By DEVELOPED: NaChef, Max Savage, Graham, and Folkart.
- Warm Cinnamon Apple Cider by u/kindground
- Sweet Blueberry Soda by Yours Truly
Really enjoying the apple cider mix, its honestly spot on and my 10mL tester was gone within the hour.
Still really fond of my first "official" recipe also. Pretty damn tasty and I'm happy to have finally come up with something that I can vape more than 30mL of
Had about 10ml of Camp Tigerclaw sitting in a 50ml bottle so made 30ml of a 123 based on 3 of the core components of Water Malone, basically 3% watermelon, 2% Dragon fruit, 1% Wild Melon. Then I threw the finished result in with the Camp Tigerclaw and it totally works as a "reimagining" of Water Malone.
I made a Blueberry waffle recipe on my own that I like a lot. I can definitely vape it all day, but I'm still perfecting it to my taste:
FLV Blueberry Muffin, 2% TFA Butter, 1% FA Maple Syrup, 0.5% TFA Belgian Waffle, 8%
I get the maple syrup and blueberry on the inhale, the butter in the middle, and waffle on the exhale. I tried maple syrup at 1% the first time and it overpowered everything else.
When my next flavor order comes in, I'm going to try it with FA Bilberry at 1% instead of Blueberry Muffin, and add INW Biscuit at 1%. Thoughts/suggestions?
Classic south african milk tart by the vogflog. Its om ATF can't put a link coz i dont know how. I love milk tart and i have tried an abundance of commercial and one shot/diy recipe milk tarts and this one has been not only the most authentic but also the most delicious recipe i have ever vaped. Anyone who has had real south african milk tart and loved it. Will love this recipe. I mixed up a 10ml and had finished it before it could even reach its recommended 5 day steep. It was that good. Had to mix up a 100ml right away so i can really get the full development of it. I am fighting myself waiting to give it its 5 days.
Made a variation of Rusty Pelican which is pretty good. Didn't have all the flavors for the original so made some changes.
I made this nutella thing a while ago, got addicted to it then forgot... last month a friend asked for a 200ml of it and suddenly its on my tank for a week now.
If anybody try, lemme know
It's a sweet blue raspberry lemonade. Stuff is amazing!
Basic Root Beer: Flavor West Root Beer 20% 50/50 PG/VG 3% nic Wasp Nano RTA
Tastes just like root beer barrels. I've been vaping this all day every day for over a month. It's just so satisfying
I realize this is a recipe thread, but as a mixer how are you liking the flavor on that wasp nano? I have one on order to build for my wife (so I can stop buying replacement coils) but I'm a 100% rda user, havent built on an rta in years- any quirks or tips?
This reply ended up being longer than I expected, but it's worth the read, I promise.
Whether you get the wasp nano rda, rdta, or rta, you're gonna be happy. The flavor is there in a big big way. You gotta use good wire. At least throw a clapton in there. People who do not rant and rave about these devices, aren't building them right. Plain round wire doesn't perform well and people blame the device instead of their build.
I am running:
8 wraps 3mm macro coil
26ga Kanthal + 32ga Nichrome 80 clapton.
The coil reads out at 0.9ohms, and I'm running it at 25 watts. With the airflow wide open, it's an effortless direct lung hit that's on the cool side of warm. The flavor is incredibly intense. There is very respectable flavor production with this set up (as in 5 back to back hits and I need to roll down my car windows to see). With 50/50 juice it wicks perfectly without a single dry hit and I'll chain vape the tank empty. Dont use thicker juice. It just doesn't work.
This is the first and only rta I've tried and liked. It's also the only one I've not had major issues with.
Close the airflow when you fill it, and minimize the time the cap is off the tank. I like to get my juice uncapped, then the tank, squeeze it in fast, cap the tank, cap the juice. If you do not close the air flow, the juice will pour out the bottom.
Also be careful to not cross thread the cap. It's plastic screwing into metal, so if you cross thread it, you'll ruin it.
All that being said, it's easy to fill, easy to get the cap on there right if you're paying any attention at all, the flavor is awesome, the vapor production is awesome.
As an rda user, you need to get yourself the wasp nano rda if you don't already have one. I run a nichrome 5 core clapton 28ga*5 +36ga in mine and it's incredible. I run it at about 35 watts.
Whoa, thanks for the detailed reply seems like you really enjoy the rta. I have seen a few reviews on it and it looked like a good atty for the money so I figured why not. I also have a Kylin v2 rta on the way (I figure between the 2 at least one has to be able to replace the sub ohm take she is running) as well as a dripper for myself. Gotta love those holiday deals.
>The flavor is there in a big big way. You gotta use good wire. At least throw a clapton in there. People who do not rant and rave about these devices, aren't building them right. Plain round wire doesn't perform well and people blame the device instead of their build.
I have 36k/26k and 36k/28k clapton spools as well as a spool of 32k/2x26k and 40n80/4x30n80. I'll use one of those instead of round wire, thanks for the tip.
>With 50/50 juice it wicks perfectly without a single dry hit and I'll chain vape the tank empty. Dont use thicker juice. It just doesn't work.
This is kinda weird, I'll keep it in mind. Are the flow ports really small or do you have them wicked tight by chance? I've seen/read some rtas are kinda finicky and have to be wicked almost super short and have the tails really thinned out, wonder if this is the case? 50/50 is kinda harsh for both of us but I guess if dry hits are an issue I'll thin down a mix.
>Close the airflow when you fill it, and minimize the time the cap is off the tank. I like to get my juice uncapped, then the tank, squeeze it in fast, cap the tank, cap the juice. If you do not close the air flow, the juice will pour out the bottom.
Gotcha, initally this is what made me like drippers more, just build it then drip and vape. I'll pass that tip on.
>Also be careful to not cross thread the cap. It's plastic screwing into metal, so if you cross thread it, you'll ruin it.
This is the thing that made me hesitant to buy it but $14 on sale I pulled the trigger. Is the plastic cap made with decent stuff or are the threads easily destroyed?
>As an rda user, you need to get yourself the wasp nano rda if you don't already have one.
Almost did as I was looking for a single coil. I have an og Recurve but dont really like it too much, I cant get decent flavor out of the thing for some reason. So I was going to get the wasp rda but insted went with the same company and got an Oumier VLS rda. It had good reviews and looked versatile as you could build verticle or horizontal. We will see though I might grab the wasp rda just to check it out. Again, thank you for the time you put into this reply.
I've been vaping a lot of Soho Time. I didn't think a S&V tobacco was possible.
3% Cap Sweet Strawberry
3.5% OOO Cream (Milky Undertones)
2% FLV Boysenberry
.75% FA Bilberry
.25% Cap Super Sweet
I love FLV boysenberry, and berries in general; ESPECIALLY in vapes. So I happened to whip up a quick berries n cream tester before I called it a night. I’m really enjoying it off the shake. That OOO cream just adds that creamy texture that could be made even creamier by something like TFA Vanilla Swirl. Yum!
I stopped using percentages once engrained my ratios into my brain. Iv vaping on some strawberry kiwi by flavor art, about 1.2ml in a 30ml. So 4% I think. Mixed it with a little forest fruit by flavor art as well, about .6 in a 30 ml, 2% there I believe.
I do all my own mixing, I dont follow recipes