TFA 4oz Bottle threading?

submitted over 8 years ago by Demon_CowMixologist

I know the old bottles 24/400 fits but the shorter fatter bottles I got last time are too big.

Does TFA still use the shorter fat weird ones and if so what is the thread size?

EDIT: 28/410 fit perfectly I got mine from here https://www.usplastic.com/catalog/item.aspx?itemid=65209

I imagine that 28/400 will also work but be a little crooked as that was the case with the old 24/410 bottles if using 24/400.

Comments

3 points

by Pliensauerover 8 years ago

It is 3,4 oz or 100 ml. Not 4 oz. Just fyi so you stay on the safe side. https://www.tsa.gov/travel/security-screening/liquids-rule

3 points

by Apexifiedover 8 years agoSuckling from the teats of Daenerys Targaryen

OP said TFA, not TSA...

1 points

by Pliensauerover 8 years ago

Dat obviously tru... Still. Good to know FCC regulations ;-)

2 points

by chewymidgetover 8 years agoProud Sidebar Reader!

What are the dimensions for the new black caps for 4oz & 16oz bottles?

> The cap size is 28mm TEC (Tamper Evident Cap) and has a breakaway band. Functions on the following neck finshes: Glass – 456, 1626, 1655 and PET – 1716, 1810PCO, 1815PCO, 1816PCO, 1817PCO, 1829PCO, 1823PCO. Threads are -8 Threads per inch. > For product specifications for both the new 4oz & 16oz PET Bottles & Caps, please email Travis@PerfumersApprentice.com

That's all I could find on the new ones. I doubt anyone here is going to be able to give you the answer you seek though. Best to email them at the address above.

3 points

by Demon_Cowover 8 years agoMixologist

Thanks again, 28/410 fit perfectly if you were curious.

https://www.usplastic.com/catalog/item.aspx?itemid=65209

1 points

by Demon_Cowover 8 years agoMixologist

Thanks

1 points

by pancakethiefover 8 years ago

I asked them about this a while back and they sent me these pdf diagrams. May or may not be useful.

"The neck size for the new bottles are a 28mm instead of the 24. "

https://drive.google.com/file/d/0BwIJSqeE0zgZWUZkY1lhQS1Gb1pwMUF0Vi1rVDFPTXhpbGhj/view?usp=drivesdk

https://drive.google.com/file/d/0BwIJSqeE0zgZVXBkSmk4cHJ2T0dmNVhJSTZHZ19hZEp6ZFhR/view?usp=drivesdk

2 points

by Demon_Cowover 8 years agoMixologist

Thanks I just ordered some 28/410 and see if those work.

https://www.usplastic.com/catalog/item.aspx?itemid=65209

I'll try and remember to update this thread when they get here.

1 points

by pancakethiefover 8 years ago

Please do! I am curious myself to find a cap that works.

2 points

by Demon_Cowover 8 years agoMixologist

They fit perfectly I just had to take the little plastic non tamper bit left over from the cap for it to be flat/flush.